![]() It doesn't seem to save these values to flash. Cycling power also causes the values to revert to the defaults. ![]() I've notified Samsung but haven't received a response. So I used a voltmeter and figured out how to make a cable and wrote a short basic program to set the one's that I could to the values I want. The reason I started on this quest today was because my TV seems to do a power-on reset occassionaly and the settings I want revert to some default value. If anyone's interested I can provide these but another thread referenced a Crutchfield's manual that has all of them in it. Like setting the LED level or controlling the power on light. My problem is that some of the functions I wan't are not in the list. The main sleeve of the 3.5mm plug connects to the DB-9 pin 5.Ĭommunications consist of a 7 byte request to the the TV and a 3 byte response from the TV.Ī list came with the TV showing the functions and codes for each. Otherwise Power On command will not work. Only thing (Ive learn it hard way) is to do Factory Reset and make sure that TV set is used in Standalone mode. I made a cable for the 61A750 and wrote a very small PBWin program and was able to control the TV. For the ME Series displays, they use RS232C codes Link: For other Samsung models, they use Ex-Link codes Link: The port on the back of the Samsung is the same DB9 Female to 3.5mm Serial Cable. Best way to control it will be via EX-link, module is available at market (for resi models).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |